DIY: Restore Old Teak Wood Outdoor Furniture

Teak wood is very beautiful when it’s new, but over time the sun causes the natural wood to dry out which reveals a whitish gray tone rather then that beautiful store bought color it once was.

If you would like to restore your Teak wood furniture and make it look like new again. 

Items you’ll need

~Sander

~Light Grain Sand Paper

~Danish Oil Finish

~Water pressure machine (optional)

~Paint brush

Step 1 

 Before you begin, wash the wood using a soft scrub brush, and a solution mix of water and oxiclean multi-purpose cleaner. 

If you own a water pressure machine, use it on a light setting, and power wash the wood. 

Note: Because teak is a softer wood.  Be aware that pressure washing can cause permanent damage to the woods grain.  If the pressure setting is too high, it will strip the wood and defeat the purpose. 
The wood wont look different from afar, however, there will be a noticeable difference in the natural grain look & feel.  Hard washing can make deeper grooves, so it's important to use caution while pressure washing.

Once you have pressure washed. Lightly sand over the areas of wood to restore a beautiful smooth feel once again. 

 

Step 2

Dip a wide clean paint brush into the Danish Oil, and brush a coat over the teak.  Be sure to spread the oil evenly over every inch of visible teak wood. As the brush is run over the wood, you will notice how quickly it is absorbed into the wood. 

Step 3 

Apply a second coat for a deeper rich look. Allow 24 hours to dry.

 

© 2008-2017 by haniebcreations.  

Please do not take any original artwork, photographs or content from this site without permission or applicable credit.